Model Numbers & Dimensions
| Model Number | Gross Capacity Litres | Standard SFL(1) | Length(mm) | With(mm) | Height(mm) | Tare(kg) |
| FT12 | 11700 | 10530 | 2991 | 2438 | 2896 | 4910 |
| FT20 | 20000 | 18000 | 2991 | 2438 | 2896 | 4748 |
| FT30 | 30500 | 27450 | 6058 | 2438 | 2896 | 7934 |
| FT38 | 38000 | 34200 | 6058 | 2438 | 2896 | 8037 |
| FT68 | 68000 | 61200 | 12192 | 2438 | 2896 | 14100 |
| FT75 | 74388 | 66950 | 12192 | 2438 | 2896 | 14082 |
| FT80 | 81500 | 73350 | 14630 | 2438 | 2896 | 17100 |
| FT100 | 100000 | 90000 | 14630 | 2438 | 3200 | 18000 |
| FT110 | 120000 | 110000 | 14630 | 2438 | 3635 | 19000 |
Note (1) Standard SFL is set at 90% of gross volume with standard float type overfill valve.
Options available to increase Safe Fill Level to 95% - refer overfill options.
FT-Serial Tank
Self bunded with internal tank and external bund.
Corner container lock castings.
Internal ladder for access.
Three 600mm manholes.
Air breather vents for free venting.
Containment compartment (internal bund) with emergency vent.
Calibrated contents dip stick.
Interstitial space dip stick.
Top roof section designed to release water as it sits above the side rails of the tank.
Lockable top sump for access points.
Additional sockets,doubler pad points available to suit applications.
Unit sand blasted to as2.5
Underside of the base bitumen coated for protection.
Paint coating to c5-1 harsh environment standard, three coats Hempel paint to 240 micron thickness.
Statutory signage to suit end use location.
Tank manufacture and compliance plates.
